0.0400 in. Cutter Diameter x 0.0050 in. Radius x 0.0600 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52640-C3

0.0450 in. Cutter Diameter x 0.0050 in. Radius x 0.0680 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52645-C3

0.0500 in. Cutter Diameter x 0.0050 in. Radius x 0.0750 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52650-C3

0.0550 in. (1.4 mm) Cutter Diameter x 0.0050 in. Radius x 0.0830 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52655-C3

0.0600 in. Cutter Diameter x 0.0100 in. Radius x 0.0900 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52660-C3

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52662-C3

0.0700 in. Cutter Diameter x 0.0100 in. Radius x 0.1050 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52670-C3

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.1400 in. (9/64) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52693-C3

0.1000 in. Cutter Diameter x 0.0100 in. Radius x 0.1500 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52700-C3

0.2500 in. (1/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52716-C3

0.3125 in. (5/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.4700 in. Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52720-C3

0.3750 in. (3/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.5700 in. Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52724-C3

0.5000 in. (1/2) Cutter Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52732-C3

0.0394 in. (1 mm) Cutter Diameter x 0.0780 in. (5/64) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 5281M

0.0394 in. (1 mm) Cutter Diameter x 0.0780 in. (5/64) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 5281M-C3