10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, FIREX Coated, with Coolant, HB Shank, 72mm Overal Length, 40/42° Helix Angle, 0.2 chamfer (mm)

Item Code: 3366-10.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, FIREX Coated, with Coolant, HB Shank, 83mm Overal Length, 40/42° Helix Angle, 0.2 chamfer (mm)

Item Code: 3366-12.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, FIREX Coated, with Coolant, HB Shank, 92mm Overal Length, 40/42° Helix Angle, 0.35 chamfer (mm)

Item Code: 3366-16.000

20mm Diameter Endmill, 20mm shank, 4 flutes, 38mm Length of Cut, 52 Reach (mm), Carbide, FIREX Coated, with Coolant, HB Shank, 104mm Overal Length, 40/42° Helix Angle, 0.45 chamfer (mm)

Item Code: 3366-20.000

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, FIREX Coated, with Coolant, HB Shank, 57mm Overal Length, 40/42° Helix Angle, 0.15 chamfer (mm)

Item Code: 3366-6.000

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, with Coolant, HB Shank, 63mm Overal Length, 40/42° Helix Angle, 0.15 chamfer (mm)

Item Code: 3366-8.000

9/32 Inch Diameter, Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 336-7.140

7.3mm Diameter Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 336-7.300

7.4mm Diameter Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 336-7.400

7.5mm Diameter Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 336-7.500

19/64 Inch Diameter, Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 336-7.540

N Diameter, Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 336-7.670

7.7mm Diameter Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 336-7.700

7.8mm Diameter Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 336-7.800

7.9mm Diameter Taper Length Drill, 2 flutes, HSCO, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 336-7.900