Show Results For
Brand
Sort Results By:
Relevance Popularity Item Code
Showing: 82,486-82,500 of 100,000
15 25 50
no-image

#2 Diameter, Jobber Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-5.610

Unit Size: 1

no-image

5.7mm Diameter Jobber Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-5.700

Unit Size: 1

no-image

5.8mm Diameter Jobber Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-5.800

Unit Size: 1

no-image

15/64 Inch Diameter, Jobber Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-5.950

Unit Size: 1

no-image

6mm Diameter Jobber Drill, 2 flutes, HSCO, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-6.000

Unit Size: 1

no-image

6.1mm Diameter Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-6.100

Unit Size: 1

no-image

D Diameter, Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-6.250

Unit Size: 1

no-image

6.7mm Diameter Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-6.700

Unit Size: 1

no-image

7/16 Inch Diameter Endmill, 7/16 Shank, 3 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3086-11.110

Unit Size: 1

no-image

1/8 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3086-3.170

Unit Size: 1

no-image

3/16 Inch Diameter Endmill, 3/16 Shank, 3 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3086-4.760

Unit Size: 1

no-image

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3086-6.350

Unit Size: 1

no-image

5/16 Inch Diameter Endmill, 5/16 Shank, 3 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3086-7.940

Unit Size: 1

no-image

3/8 Inch Diameter Endmill, 3/8 Shank, 3 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3086-9.520

Unit Size: 1

no-image

L Diameter, Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-7.370

Unit Size: 1

Showing: 82486-82500 of 100000