#21 Diameter, 3xD Drill, 2 flutes, Carbide, nano-FIREX Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 2463-4.04

#30 Diameter, 3xD Drill, 2 flutes, Carbide, nano-FIREX Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 2463-3.26

#38 Diameter, Taper Length Drill, 2 flutes, HSCO, Bright Finish, Straight Shank, 130° Point, Right Hand Cut, 10/pack

Item Code: 617-2.58

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.062 radius

Item Code: 6759-12.706

#42 Diameter, Jobber Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut, 10/pack

Item Code: 549-2.37

M5X.8 PowerTap, Spiral Point Plug, metric thread, D4, 3 flutes, HSS-E, Steam Oxide Coated

Item Code: 5733-5.00MM

1/4-28 Tap, Spiral Point Plug, UNF thread, H4/H5, 3 flutes, HSS-E

Item Code: 3914-6.350

M10X1 Tap, Bottom, metric fine thread, D5/D6, 3 flutes, HSS-E-PM, TiCN Coated, with Coolant

Item Code: 1007-10.005

M10X1.25 Tap, Bottom, metric fine thread, D5/D6, 3 flutes, HSS-E-PM, TiCN Coated, with Coolant

Item Code: 1007-10.006

M12X1 Tap, Bottom, metric fine thread, D5/D6, 3 flutes, HSS-E-PM, TiCN Coated, with Coolant

Item Code: 1007-12.005

M12X1.25 Tap, Bottom, metric fine thread, D5/D6, 3 flutes, HSS-E-PM, TiCN Coated, with Coolant

Item Code: 1007-12.006

M12X1.5 Tap, Bottom, metric fine thread, D5/D6, 3 flutes, HSS-E-PM, TiCN Coated, with Coolant

Item Code: 1007-12.007

M14X1 Tap, Bottom, metric fine thread, D5/D6, 3 flutes, HSS-E-PM, TiCN Coated, with Coolant

Item Code: 1007-14.005

M14X1.25 Tap, Bottom, metric fine thread, D5/D6, 3 flutes, HSS-E-PM, TiCN Coated, with Coolant

Item Code: 1007-14.006

M14X1.5 Tap, Bottom, metric fine thread, D5/D6, 3 flutes, HSS-E-PM, TiCN Coated, with Coolant

Item Code: 1007-14.007