#11 Diameter, Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-4.850

4.9mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-4.900

7/16 Inch Diameter Endmill, 7/16 Shank, 2 flutes, 1 Length of Cut, Carbide, HA Shank, 2-3/4 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3174-11.110

9/16 Inch Diameter Endmill, 9/16 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3174-14.290

5/8 Inch Diameter Endmill, 5/8 Shank, 2 flutes, 1-1/4 Length of Cut, Carbide, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3174-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 2 flutes, 1-1/2 Length of Cut, Carbide, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3174-19.050

1 Inch Diameter Endmill, 1 Shank, 2 flutes, 1-3/4 Length of Cut, Carbide, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0079 chamfer

Item Code: 3174-25.400

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 7/16 Length of Cut, Carbide, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.0012 chamfer

Item Code: 3174-3.170

3/16 Inch Diameter Endmill, 3/16 Shank, 2 flutes, 9/16 Length of Cut, Carbide, HA Shank, 2 Overall Length, 45° Helix Angle, 0.0012 chamfer

Item Code: 3174-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 3/4 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3174-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 2 flutes, 13/16 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3174-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 7/8 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3174-9.520

5mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-5.000

5.1mm Diameter Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-5.100

13/64 Inch Diameter, Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 317-5.160