7.4mm Diameter Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-7.400

7.5mm Diameter Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-7.500

19/64 Inch Diameter, Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-7.540

7.6mm Diameter Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-7.600

7.7mm Diameter Jobber Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Left Hand Cut

Item Code: 308-7.700

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.015 radius

Item Code: 3087-12.702

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3087-12.704

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.062 radius

Item Code: 3087-12.706

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, 0.015 radius

Item Code: 3087-3.172

3/16 Inch Diameter Endmill, 3/16 Shank, 2 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.015 radius

Item Code: 3087-4.762

3/16 Inch Diameter Endmill, 3/16 Shank, 2 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3087-4.764

3/16 Inch Diameter Endmill, 3/16 Shank, 2 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.062 radius

Item Code: 3087-4.766

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.015 radius

Item Code: 3087-6.352

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3087-6.354

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.062 radius

Item Code: 3087-6.356