0.838 mm Drill Diameter x 8.200 mm Flute Length 2 Flute AlTiN Nano Coated Carbide Miniature High Performance Drill

Item Code: ARY0330-C6

0.889 mm Drill Diameter x 8.600 mm Flute Length 2 Flute AlTiN Nano Coated Carbide Miniature High Performance Drill

Item Code: ARY0350-C6

0.0320 in. Diameter x 0.2500 in. (1/4) Margin Length 4 Flute AlTiN Coated Carbide Miniature Reamer

Item Code: RSB0320-C3

0.0780 in. (5/64) Cutter Diameter x 0.1170 in. Length of Cut x 0.8000 in. Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 966078-C3

0.0980 in. (2.5 mm) Cutter Diameter x 0.6250 in. (5/8) Reach 4 Flute AlTiN Nano Coated Carbide Single Form #6 Thread Milling Cutter for Hardened Steels

Item Code: 930320-C6

0.1562 in. (5/32) Cutter Diameter x 0.0400 in. Width x 0.2500 in. (1/4) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 69440-C3

1.0000 in. (1) Cutter Diameter x 0.0310 in. (1/32) Width 12 Flute AlTiN Coated Carbide Square Reduced Shank Deep Keyseat Cutter

Item Code: 982005-C3

0.0100 in. Cutter Diameter x 0.0080 in. Length of Cut x 0.0150 in. (1/64) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 37810-C6

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 0.2500 in. (1/4) Width x 0.7500 in. (3/4) Neck Length 8 Flute Carbide Corner Radius Keyseat Cutter

Item Code: 933780

0.0930 in. (3/32) Cutter Diameter x 0.0270 in. Width x 0.2500 in. (1/4) Neck Length 2 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 965593-C3

0.1250 in. (1/8) Shank Diameter x 0.0200 in. Radius x 30 Deg. Included 1 Flute Carbide Radius Engraver

Item Code: 58610-HARVEY

0.0800 in. Cutter Diameter x 0.5000 in. (1/2) Reach 2 Flute AlTiN Coated Carbide Single Form #4 Thread Milling Cutter

Item Code: 993910-C3

0.1250 in. (1/8) Radius x 0.0460 in. Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 948425

0.2500 in. (1/4) Drill Diameter x 0.7500 in. (3/4) Flute Length 90 Deg. 2 Flute Carbide Spot Drill

Item Code: 55816

0.6250 in. (5/8) Cutter Diameter x 0.0780 in. (5/64) Width x 1.0000 in. (1) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 70940-C3