0.2500 in. (1/4) Cutter Diameter x 0.0620 in. (1/16) Width x 0.1250 in. (1/8) Neck Length 4 Flute TiB2 Coated Carbide Square Deep Keyseat Cutter for Non-Ferrous

Item Code: 909262-C8

0.2500 in. (1/4) Cutter Diameter x 0.1250 in. (1/8) Width x 0.1250 in. (1/8) Neck Length 4 Flute Carbide Square Deep Keyseat Cutter for Non-Ferrous

Item Code: 909295

0.2500 in. (1/4) Cutter Diameter x 0.1250 in. (1/8) Width x 0.1250 in. (1/8) Neck Length 4 Flute TiB2 Coated Carbide Square Deep Keyseat Cutter for Non-Ferrous

Item Code: 909295-C8

0.0310 in. (1/32) Cutter Diameter x 0.0080 in. Radius x 0.0460 in. Length of Cut x 0.2500 in. (1/4) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 909331

0.0310 in. (1/32) Cutter Diameter x 0.0080 in. Radius x 0.0460 in. Length of Cut x 0.2500 in. (1/4) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 909331-C3

0.0620 in. (1/16) Cutter Diameter x 0.0080 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 909362

0.0620 in. (1/16) Cutter Diameter x 0.0080 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 909362-C3

0.0930 in. (3/32) Cutter Diameter x 0.0080 in. Radius x 0.1400 in. (9/64) Length of Cut x 0.7500 in. (3/4) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 909393

0.0930 in. (3/32) Cutter Diameter x 0.0080 in. Radius x 0.1400 in. (9/64) Length of Cut x 0.7500 in. (3/4) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 909393-C3

0.1250 in. (1/8) Cutter Diameter x 0.0080 in. Radius x 0.1870 in. (3/16) Length of Cut x 1.0000 in. (1) Reach 3 Flute Carbide Corner Radius End Mill

Item Code: 909408

0.1250 in. (1/8) Cutter Diameter x 0.0080 in. Radius x 0.1870 in. (3/16) Length of Cut x 1.0000 in. (1) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 909408-C3

0.0310 in. (1/32) Cutter Diameter x 0.0470 in. (3/64) Length of Cut x 0.3120 in. (5/16) Reach 3 Flute AlTiN Coated Carbide V-Helix Square End Mill

Item Code: 909531-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.6250 in. (5/8) Reach 3 Flute AlTiN Coated Carbide V-Helix Square End Mill

Item Code: 909562-C3

0.0930 in. (3/32) Cutter Diameter x 0.1400 in. (9/64) Length of Cut x 0.9500 in. Reach 3 Flute AlTiN Coated Carbide V-Helix Square End Mill

Item Code: 909593-C3

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 1.2500 in. (1-1/4) Reach 4 Flute AlTiN Coated Carbide V-Helix Square End Mill

Item Code: 909608-C3