#29 Diameter, 3xD Drill, 2 flutes, Carbide, nano-FIREX Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 2463-3.45

D Diameter, Extra Length Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 502-6.25

#29 Diameter, 5xD Drill, 2 flutes, Carbide, nano-FIREX Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 2464-3.45

M18X1 Tap, metric fine thread, D4/D5, 4 flutes, HSS-E, Bright Finish

Item Code: 827-18.005

9/32 Inch Diameter, 3xD Drill, 2 flutes, Carbide, nano-FIREX Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 2463-7.14

9/64 Inch Diameter, 15xD Drill, 2 flutes, Carbide, TiAlN Coated, with Coolant, Straight Shank, 135° Point, Right Hand Cut

Item Code: 6509-3.57

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.125 radius

Item Code: 6759-12.709

7/64 Inch Diameter, Taper Length Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 317-2.78

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 40° Helix Angle, 0.0177 chamfer

Item Code: 4250-19.05

3/4 Inch Diameter Endmill, 5 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 4264-19.05

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, 3 Reach, Carbide, nano-Si Coated, HA Shank, 5 Overall Length, 55° Helix Angle, 0.0059 chamfer

Item Code: 3183-19.05

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

Item Code: 4251-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 3 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 5 Overall Length, 40° Helix Angle, 0.0157 chamfer

Item Code: 4259-12.70

1/4 Inch Diameter, 15xD Drill, 2 flutes, Carbide, TiAlN Coated, with Coolant, Straight Shank, 135° Point, Right Hand Cut

Item Code: 6509-6.35

1mm Diameter Micro Drill, 2 flutes, HSS-E-PM, TiN Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 660-1.00