0.0310 in. (1/32) Cutter Diameter x 0.0470 in. (3/64) Length of Cut x 0.3750 in. (3/8) Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 879431-C8

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.7500 in. (3/4) Reach 3 Flute Carbide V-Helix Ball End Mill

Item Code: 879462

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.7500 in. (3/4) Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 879462-C8

0.0930 in. (3/32) Cutter Diameter x 0.1400 in. (9/64) Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flute Carbide V-Helix Ball End Mill

Item Code: 879493

0.0930 in. (3/32) Cutter Diameter x 0.1400 in. (9/64) Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 879493-C8

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute Carbide V-Helix Ball End Mill

Item Code: 879508

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 879508-C8

0.1250 in. (1/8) Shank Diameter x 0.0200 in. Flat x 30 Deg. Included 2 Flute AlTiN Nano Coated Carbide Tipped Engraver For Hardened Steels

Item Code: 879608-C6

0.1875 in. (3/16) Shank Diameter x 45 Deg. Per Side 12 RH Teeth 6 LH Teeth Carbide Deburring Doubled-Ended Chamfer Cutter

Item Code: 879745

0.1875 in. (3/16) Shank Diameter x 45 Deg. Per Side 12 RH Teeth 6 LH Teeth AlTiN Coated Carbide Deburring Doubled-Ended Chamfer Cutter

Item Code: 879745-C3

1.2500 in. (1-1/4) Cutter Diameter x 0.1250 in. (1/8) Width 14 Flute Carbide Square Reduced Shank Deep Keyseat Cutter

Item Code: 879950

1.2500 in. (1-1/4) Cutter Diameter x 0.2500 in. (1/4) Width 14 Flute Carbide Square Reduced Shank Deep Keyseat Cutter

Item Code: 879970

1.2500 in. (1-1/4) Cutter Diameter x 0.2500 in. (1/4) Width 14 Flute AlTiN Coated Carbide Square Reduced Shank Deep Keyseat Cutter

Item Code: 879970-C3

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.1870 in. (3/16) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius Finisher

Item Code: 880108-C6

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.2850 in. Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius Finisher

Item Code: 880112-C6