25mm Diameter Endmill, 25mm shank, 4 flutes, 45mm Length of Cut, 63 Reach (mm), Carbide, FIREX Coated, HB Shank, 121mm Overal Length, 35/38° Helix Angle, 2 radius (mm)

Item Code: 3873-25.020

25mm Diameter Endmill, 25mm shank, 4 flutes, 45mm Length of Cut, 63 Reach (mm), Carbide, FIREX Coated, HB Shank, 121mm Overal Length, 35/38° Helix Angle, 3 radius (mm)

Item Code: 3873-25.030

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, FIREX Coated, HB Shank, 57mm Overal Length, 35/38° Helix Angle, 0.5 radius (mm)

Item Code: 3873-6.005

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, FIREX Coated, HB Shank, 57mm Overal Length, 35/38° Helix Angle, 1 radius (mm)

Item Code: 3873-6.010

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, FIREX Coated, HB Shank, 57mm Overal Length, 35/38° Helix Angle, 2 radius (mm)

Item Code: 3873-6.020

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HB Shank, 63mm Overal Length, 35/38° Helix Angle, 0.5 radius (mm)

Item Code: 3873-8.005

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HB Shank, 63mm Overal Length, 35/38° Helix Angle, 1 radius (mm)

Item Code: 3873-8.010

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HB Shank, 63mm Overal Length, 35/38° Helix Angle, 2 radius (mm)

Item Code: 3873-8.020

5/8 Inch Diameter Endmill, 5/8 Shank, 2 flutes, 1-1/4 Length of Cut, Super A Coated, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.004 chamfer

Item Code: 3874-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 2 flutes, 1-1/2 Length of Cut, Super A Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.004 chamfer

Item Code: 3874-19.050

1 Inch Diameter Endmill, 1 Shank, 2 flutes, 1-1/2 Length of Cut, Super A Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.008 chamfer

Item Code: 3874-25.400

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 7/16 Length of Cut, Super A Coated, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.001 chamfer

Item Code: 3874-3.170

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 2 Length of Cut, Super A Coated, HA Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.004 chamfer

Item Code: 3875-12.700

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1-1/8 Length of Cut, Super A Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3875-6.350

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 1-1/8 Length of Cut, Super A Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3875-9.520