11.2mm Diameter Screw Machine Drill, 2 flutes, HSCO, Steam Oxide Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 329-11.20

19/64 Inch Diameter, 5xD Drill, 2 flutes, Carbide, FIREX Coated, Straight Shank, 140° Point, Right Hand Cut

Item Code: 5515-7.54

23/64 Inch Diameter, 5xD Drill, 2 flutes, Carbide, FIREX Coated, Straight Shank, 140° Point, Right Hand Cut

Item Code: 5515-9.13

19/64 Inch Diameter, Jobber Drill, 2 flutes, HSCO, TiN Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 5519-7.54

10-24 Tap, UNC thread, H3/H4, 3 flutes, HSS-E, TiCN Coated

Item Code: 3946-4.826

#34 Diameter, Screw Machine Drill, 2 flutes, HSS, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 223-2.82

M24X1.5 Tap, metric fine thread, D6/D7, 4 flutes, HSS-E, Bright Finish

Item Code: 827-24.007

M28X1.5 Tap, metric fine thread, D7/D8, 4 flutes, HSS-E, Bright Finish

Item Code: 827-28.007

M32X1.5 Tap, metric fine thread, D7/D8, 4 flutes, HSS-E, Bright Finish

Item Code: 827-32.007

7mm Diameter Taper Length Drill, 2 flutes, HSS, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 217-7.00

1/2-13 Tap, UNC thread, H6/H7, 4 flutes, HSS-E-PM, TiAlN Coated, 10° Spiral Flute

Item Code: 2922-12.70

3.3mm Diameter Extra Length Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 503-3.30

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0118 chamfer

Item Code: 3188-7.94

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 30/32° Helix Angle, 0.012 chamfer

Item Code: 3082-7.94

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 30/32° Helix Angle, 0.012 chamfer

Item Code: 3082-6.35