0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute Carbide Square End Mill

Item Code: 937116

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 1.5000 in. (1-1/2) Reach 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 937116-C3

1.0000 in. (1) Cutter Diameter x 0.0625 in. (1/16) Radius 6 Flute Carbide Full Radius Reduced Shank Deep Keyseat Cutter

Item Code: 937362

1.0000 in. (1) Cutter Diameter x 0.0625 in. (1/16) Radius 6 Flute AlTiN Coated Carbide Full Radius Reduced Shank Deep Keyseat Cutter

Item Code: 937362-C3

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.0620 in. (1/16) Width x 0.2810 in. (9/32) Neck Length 6 Flute Carbide Corner Radius Keyseat Cutter

Item Code: 937762

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.0620 in. (1/16) Width x 0.2810 in. (9/32) Neck Length 6 Flute AlTiN Coated Carbide Corner Radius Keyseat Cutter

Item Code: 937762-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.2000 in. Length of Cut 2 Flute Carbide Square Upcut End Mill

Item Code: 938920

0.0781 in. (5/64) Cutter Diameter x 0.8000 in. Length of Cut 2 Flute Carbide Square Upcut End Mill

Item Code: 938978

0.1250 in. (1/8) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 2 Flute Amorphous Diamond Coated Carbide Square Upcut End Mill

Item Code: 939008-C4

0.0469 in. (3/64) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 300 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 940047

0.0469 in. (3/64) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 300 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 940047-C3

0.0781 in. (5/64) Cutter Diameter x 0.2180 in. (7/32) Neck Length x 300 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 940078

0.0781 in. (5/64) Cutter Diameter x 0.2180 in. (7/32) Neck Length x 300 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 940078-C3

0.3750 in. (3/8) Cutter Diameter x 1.2500 in. (1-1/4) Neck Length x 300 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 940124

0.3750 in. (3/8) Cutter Diameter x 1.2500 in. (1-1/4) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 940124-C3