9/64 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3153-3.57

9/32 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3153-7.14

23/64 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 1-3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3148-9.13

25/64 Inch Diameter Endmill, 7/16 Shank, 2 flutes, 1-3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3148-9.92

27/64 Inch Diameter Endmill, 7/16 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3148-10.72

13/32 Inch Diameter Endmill, 7/16 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3148-10.32

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

Item Code: 3148-12.70

#79 Diameter, Micro Drill, 2 flutes, HSS-E-PM, TiN Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 660-0.37

10-24 Tap, UNC thread, H3/H4, 3 flutes, HSS-E-PM, TiN Coated

Item Code: 3907-4.826

0.5mm Diameter Jobber Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 651-0.50

0.6mm Diameter Jobber Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 651-0.60

1.5mm Diameter Jobber Drill, 2 flutes, HSS, Bright Finish, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 206-1.50

1.8mm Diameter Jobber Drill, 2 flutes, HSS, Bright Finish, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 206-1.80

1/2-20 PowerTap, UNF thread, H3, 4 flutes, HSS-E, Steam Oxide Coated

Item Code: 4405-12.70

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 3-1/2 Overall Length, 55° Helix Angle, 0.0059 chamfer

Item Code: 3182-15.87