25mm Diameter Endmill, 25mm shank, 10 flutes, 45mm Length of Cut, Carbide, HB Shank, 121mm Overal Length, 45° Helix Angle, 0.2 chamfer (mm)

Item Code: 3019-25.000

6mm Diameter Endmill, 6mm shank, 6 flutes, 13mm Length of Cut, Carbide, HB Shank, 57mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3019-6.000

8mm Diameter Endmill, 8mm shank, 6 flutes, 19mm Length of Cut, Carbide, HB Shank, 63mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

Item Code: 3019-8.000

M10X1.5 Tap, Modified Bottom, Metric thread, D5/D6, 3 flutes, HSS-E-PM, TiCN Coated, with Coolant

Item Code: 302-10.000

10mm Diameter Endmill, 10mm shank, 2 flutes, 40mm Length of Cut, Carbide, FIREX Coated, HA Shank, 100mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3021-10.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 45mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-12.000

14mm Diameter Endmill, 14mm shank, 2 flutes, 45mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-14.000

14mm Diameter Endmill, 16mm shank, 2 flutes, 65mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-14.001

16mm Diameter Endmill, 16mm shank, 2 flutes, 65mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-16.000

18mm Diameter Endmill, 18mm shank, 2 flutes, 65mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-18.000

18mm Diameter Endmill, 20mm shank, 2 flutes, 65mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-18.001

20mm Diameter Endmill, 20mm shank, 2 flutes, 65mm Length of Cut, Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3021-20.000

3mm Diameter Endmill, 3mm shank, 2 flutes, 20mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3021-3.000

4mm Diameter Endmill, 4mm shank, 2 flutes, 25mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3021-4.000

5mm Diameter Endmill, 5mm shank, 2 flutes, 30mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3021-5.000