0.3125 in. (5/16) Cutter Diameter x 0.3125 in. (5/16) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 4 Flute Tplus Coated Ball Endmill

Item Code: 83287

3/16 in. Diameter x 3/8 in. Length of Cut x 2 in. Overall Length x 0.015 in. Radius Carbide 5 Flutes GMX-35 Coated Endmill

Item Code: GM316RS5015

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius GMS2 Coated Carbide 5 Flutes Endmill

Item Code: GMHT12R5030

0.0600 in. Cutter Diameter x 0.1800 in. Length of Cut 2 Flute AlTiN Coated Carbide Square End Mill

Item Code: 72060-C3

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0200 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 81958-HELICAL

0.0400 in. Cutter Diameter x 0.0600 in. Length of Cut x 0.3250 in. Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 34240-C3

1/2 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMX-35 Coated Endmill

Item Code: GM12RXL5030

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 4.0000 in. (4) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 83107-HELICAL

1/4 x 1/4 x 3/4 x 2-1/2 Inch Solid Carbide TiAlN Coated 4 Flute Endmill

Item Code: I4S0250T075R TIALN

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide Coolant Through Combination Feed & HEM 5 Flute TPLUS Coated Endmill

Item Code: 86431-HELICAL

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 6 Flutes Square WTF Coated Endmill

Item Code: GMHT14F6WTF

1/4 x 1/4 x 3/4 x 2-1/2 Inch Solid Carbide AlTiN Coated 5 Flute Endmill

Item Code: TM5V0S07002S

5/16 (.3125) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball

Item Code: 30735-FULLERTON

3/16 in. x 3/16 in. x 5/8 in. x 2-1/2 in. Solid Carbide 4 Flute Cylindrical Shank Ball Nose End Mill

Item Code: W40BE05001RBT WU20PE

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 74393-C3