4mm Diameter Endmill, 6mm shank, 2 flutes, 8mm Length of Cut, Carbide, Bright Finish, HA Shank, 57mm Overal Length, 45° Helix Angle, 0.03 chamfer (mm)

Item Code: 3309-4.00

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/2 Length of Cut, Carbide, Bright Finish, HA Shank, 2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3164-3.17

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0197 chamfer

Item Code: 3188-19.05

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, Super A Coated, HA Shank, 4 Overall Length, 30° Helix Angle, 0.02 chamfer

Item Code: 3886-19.05

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3181-19.05

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 3-1/2 Overall Length, 39/40/41° Helix Angle, 0.0098 chamfer

Item Code: 4265-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3191-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer

Item Code: 3115-12.70

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 44/45/46° Helix Angle, 0.0039 chamfer

Item Code: 3115-9.52

3/4 Inch Diameter Endmill, 3/4 Shank, 6 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer

Item Code: 3115-19.05

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3101-9.52

5/16 Inch Diameter Endmill, 5/16 Shank, 2 flutes, 5/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3191-7.94

3/8 Inch Diameter Endmill, 2 flutes, 3/4 Length of Cut, PCD, Bright Finish, HA Shank, 3 Overall Length

Item Code: 3867-9.52

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 55° Helix Angle, 0.0039 chamfer

Item Code: 3182-9.52

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, 3 Reach, Carbide, nano-Si Coated, HA Shank, 5 Overall Length, 55° Helix Angle, 0.0059 chamfer

Item Code: 3183-15.87