0.3750 in. (3/8) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute Cobalt Fine Pitch Rougher Endmill

Item Code: TE66114

0.4375 in. (7/16) Cutter Diameter x 1.0000 in. (1) Length of Cut 4 Flute Cobalt Fine Pitch Rougher Endmill

Item Code: TE66119

0.5000 in. (1/2) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 4 Flute Cobalt Fine Pitch Rougher Endmill

Item Code: TE66129

0.7500 in. (3/4) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute Cobalt Fine Pitch Rougher Endmill

Item Code: TE66145

1.0000 in. (1) Cutter Diameter x 2.0000 in. (2) Length of Cut 5 Flute Cobalt Fine Pitch Rougher Endmill

Item Code: TE66166

0.6250 in. (5/8) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute Cobalt Fine Pitch Rougher Endmill

Item Code: TE66136

0.5000 in. (1/2) Cutter Diameter x 2.0000 in. (2) Length of Cut 2 Flute Carbide Square Endmill

Item Code: TC15033

0.1250 in. (1/8) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 4 Flute TiCN Coated Carbide Ball Endmill

Item Code: TC91508

0.3750 in. (3/8) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 4 Flute Carbide Square Endmill

Item Code: TC17525

0.0469 in. (3/64) Cutter Diameter x 0.1250 in. (1/8) Length of Cut 2 Flute Carbide Square Endmill

Item Code: TC10003

0.7500 in. (3/4) Cutter Diameter x 0.1250 in. (1/8) Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute Carbide Corner Radius Endmill

Item Code: TC74083

0.7500 in. (3/4) Cutter Diameter x 0.1250 in. (1/8) Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74184

0.5000 in. (1/2) Cutter Diameter x 0.1250 in. (1/8) Radius x 1.0000 in. (1) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74158

0.5000 in. (1/2) Cutter Diameter x 3.0000 in. (3) Length of Cut 4 Flute Carbide Square Endmill

Item Code: TC17533

0.3125 in. (5/16) Cutter Diameter x 0.0300 in. Radius x 0.8125 in. (13/16) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74130