1/2 Inch Diameter Endmill, 1/2 Shank, 5 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3 Overall Length, 45° Helix Angle, 0.0197 chamfer

Item Code: 3098-12.70

4mm Diameter Endmill, 6mm shank, 4 flutes, 8mm Length of Cut, 15 Reach (mm), Carbide, nano-A Coated, HA Shank, 54mm Overal Length, 36/38° Helix Angle, 0.15 chamfer (mm)

Item Code: 3804-4.00

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.016 chamfer

Item Code: 3080-12.70

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA Shank, 4 Overall Length, 55° Helix Angle, 0.0059 chamfer

Item Code: 3182-19.050

3mm Diameter Endmill, 3mm shank, 3 flutes, 7mm Length of Cut, Carbide, Bright Finish, HA Shank, 38mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

Item Code: 3203-3.00

16mm Diameter Endmill, 16mm shank, 5 flutes, 48mm Length of Cut, 58 Reach (mm), Carbide, FIREX Coated, HB Shank, 108mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

Item Code: 3898-16.00

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.02 chamfer

Item Code: 3060-19.05

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1-5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3166-6.35

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

Item Code: 3114-7.94

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 35/38° Helix Angle, 0.0177 chamfer

Item Code: 3114-19.05

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3165-9.52

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3165-4.76

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.031 radius

Item Code: 3089-6.354

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.012 chamfer

Item Code: 3053-9.52

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.012 chamfer

Item Code: 3060-6.35