23/64 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 1-3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-9.128

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-9.520

25/64 Inch Diameter Endmill, 7/16 Shank, 2 flutes, 1-3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle

Item Code: 3159-9.920

7/16 Inch Diameter Endmill, 7/16 Shank, 2 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 30° Helix Angle

Item Code: 3160-11.110

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 30° Helix Angle

Item Code: 3160-12.700

3/4 Inch Diameter Endmill, 3/4 Shank, 2 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 30° Helix Angle

Item Code: 3160-19.050

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle

Item Code: 3160-3.170

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle

Item Code: 3160-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle

Item Code: 3160-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle

Item Code: 3160-9.520

1/16 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/16 Length of Cut, Carbide, HA Shank, 1-1/2 Overall Length, 30° Helix Angle

Item Code: 3161-1.590

5/64 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/4 Length of Cut, Carbide, HA Shank, 1-1/2 Overall Length, 30° Helix Angle

Item Code: 3161-1.984

13/32 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1-5/16 Length of Cut, Carbide, HA Shank, 2-3/4 Overall Length, 30° Helix Angle

Item Code: 3161-10.319

27/64 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1-5/16 Length of Cut, Carbide, HA Shank, 2-3/4 Overall Length, 30° Helix Angle

Item Code: 3161-10.716

7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1 Length of Cut, Carbide, HA Shank, 2-3/4 Overall Length, 30° Helix Angle

Item Code: 3161-11.110