0.1250 in. (1/8) Cutter Diameter x 0.0080 in. Radius x 0.1870 in. (3/16) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 847908-C6

3/4 in. Diameter x 0.374 in. Length of Cut x 3 in. Overall Length x 82 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

Item Code: CMHP34C5082

0.0310 in. (1/32) Cutter Diameter x 0.0470 in. (3/64) Length of Cut 3 Flute Carbide V-Helix Square End Mill

Item Code: 968731

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.3120 in. (5/16) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53662-C6

3/32 in. Diameter x 3/8 in. Length of Cut x 1-1/2 in. Overall Length Carbide 4 Flutes Square TiAlN Coated Endmill

Item Code: CEM332F4TIALN

0.2500 in. (1/4) Cutter Diameter x 0.0600 in. Radius x 0.5000 in. (1/2) Length of Cut 3 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC16415

1/2 in. x 1/2 in. x 1-1/2 in. x 3-1/2 in. Solid Carbide 3 Flute Cylindrical Shank Radius .060 Regular Length End Mill

Item Code: 3A09E13006RGT UNCOATED

0.3750 in. (3/8) Shank Diameter x 45 Deg. Per Side 3 Flute Carbide Flat Chamfer Cutter

Item Code: 18445

0.5000 in. (1/2) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 1 Flute Carbide Square Upcut End Mill

Item Code: 883832

0.1875 in. (3/16) Cutter Diameter x 0.2850 in. Length of Cut x 1.5000 in. (1-1/2) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Square End Mill

Item Code: 978312-C6

1/4 x 1/4 x 3/4 x 2-1/2 Inch AlTiN Coated Solid Carbide .015 Corner Radius 5-Flute End Mill

Item Code: TM5V0S07002A

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Square Endmill

Item Code: 82529-HELICAL

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 5 Flute AlTiN Coated Carbide V-Helix Square Finisher End Mill

Item Code: 967908-C3

0.1000 in. Radius x 0.5000 in. (1/2) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16100-HARVEY

0.0100 in. Cutter Diameter x 0.0300 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 970510-C6