0.0250 in. Cutter Diameter x 0.0050 in. Radius x 0.2030 in. (13/64) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 949825-C3

0.0310 in. (1/32) Cutter Diameter x 0.0050 in. Radius x 0.2500 in. (1/4) Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 949831

0.0390 in. (1 mm) Cutter Diameter x 0.0050 in. Radius x 0.3250 in. Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 949839

0.0390 in. (1 mm) Cutter Diameter x 0.0050 in. Radius x 0.3250 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 949839-C3

0.0470 in. (3/64) Cutter Diameter x 0.0050 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 949847

0.0470 in. (3/64) Cutter Diameter x 0.0050 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 949847-C3

0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.5000 in. (1/2) Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 949862

0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.5000 in. (1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 949862-C3

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.6250 in. (5/8) Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 949878

0.0780 in. (5/64) Cutter Diameter x 0.0050 in. Radius x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 949878-C3

0.0930 in. (3/32) Cutter Diameter x 0.0050 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flute Carbide Corner Radius End Mill

Item Code: 949893

0.0930 in. (3/32) Cutter Diameter x 0.0050 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 949893-C3

0.0150 in. (1/64) Cutter Diameter x 0.0450 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 950015-C3

0.0310 in. (1/32) Cutter Diameter x 0.0930 in. (3/32) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 950031-C3

0.0470 in. (3/64) Cutter Diameter x 0.1410 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Ball End Mill

Item Code: 950047-C3