3/4 Inch Diameter Endmill, 3/4 Shank, 2 flutes, 2-1/4 Length of Cut, Carbide, HA Shank, 5 Overall Length, 30° Helix Angle

Item Code: 3158-19.050

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 1/2 Length of Cut, Carbide, HA Shank, 2 Overall Length, 30° Helix Angle

Item Code: 3158-3.170

3/16 Inch Diameter Endmill, 3/16 Shank, 2 flutes, 3/4 Length of Cut, Carbide, HA Shank, 2-1/2 Overall Length, 30° Helix Angle

Item Code: 3158-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, HA Shank, 3 Overall Length, 30° Helix Angle

Item Code: 3158-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, HA Shank, 3 Overall Length, 30° Helix Angle

Item Code: 3158-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 1-1/8 Length of Cut, Carbide, HA Shank, 3 Overall Length, 30° Helix Angle

Item Code: 3158-9.520

1/16 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 3/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-1.590

5/64 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-1.984

13/32 Inch Diameter Endmill, 7/16 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3159-10.319

27/64 Inch Diameter Endmill, 7/16 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3159-10.716

7/16 Inch Diameter Endmill, 7/16 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle

Item Code: 3159-11.110

29/64 Inch Diameter Endmill, 1/2 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3159-11.509

15/32 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle

Item Code: 3159-11.906

31/64 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle

Item Code: 3159-12.303

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle

Item Code: 3159-12.700