0.3125 in. (5/16) Cutter Diameter x 0.010 in. Radius x 0.813 in. Length of Cut Carbide AlTiN Coated 2 Flute Corner Radius Endmill

Item Code: GEC-312-2-010X

0.3125 in. (5/16) Cutter Diameter x 0.010 in. Radius x 0.813 in. Length of Cut Carbide 4 Flute Corner Radius Endmill

Item Code: GEC-312-4-010

0.3125 in. (5/16) Cutter Diameter x 0.010 in. Radius x 0.813 in. Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: GEC-312-4-010X

0.3750 in. (3/8) Cutter Diameter x 0.010 in. Radius x 0.875 in. (7/8) Length of Cut Carbide 2 Flute Corner Radius Endmill

Item Code: GEC-375-2-010

0.3750 in. (3/8) Cutter Diameter x 0.010 in. Radius x 0.875 in. (7/8) Length of Cut Carbide AlTiN Coated 2 Flute Corner Radius Endmill

Item Code: GEC-375-2-010X

0.3750 in. (3/8) Cutter Diameter x 0.030 in. Radius x 0.875 in. (7/8) Length of Cut Carbide 3 Flute Corner Radius Endmill

Item Code: GEC-375-3-030

0.3750 in. (3/8) Cutter Diameter x 0.030 in. Radius x 0.875 in. (7/8) Length of Cut Carbide AlTiN Coated 3 Flute Corner Radius Endmill

Item Code: GEC-375-3-030X

0.3750 in. (3/8) Cutter Diameter x 0.010 in. Radius x 0.875 in. (7/8) Length of Cut Carbide 4 Flute Corner Radius Endmill

Item Code: GEC-375-4-010

0.3750 in. (3/8) Cutter Diameter x 0.030 in. Radius x 0.875 in. (7/8) Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: GEC-375-4-030X

0.5000 in. (1/2) Cutter Diameter x 0.030 in. Radius x 1.000 in. (1) Length of Cut Carbide 3 Flute Corner Radius Endmill

Item Code: GEC-500-3-030

0.5000 in. (1/2) Cutter Diameter x 0.010 in. Radius x 1.000 in. (1) Length of Cut Carbide 4 Flute Corner Radius Endmill

Item Code: GEC-500-4-010

0.5000 in. (1/2) Cutter Diameter x 0.010 in. Radius x 1.000 in. (1) Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: GEC-500-4-010X

0.6250 in. (5/8) Cutter Diameter x 0.090 in. Radius x 1.250 in. (1-1/4) Length of Cut Carbide 2 Flute Corner Radius Endmill

Item Code: GEC-625-2-090

0.3750 in. (3/8) Cutter Diameter x 1.750 in. (1-3/4) Length of Cut Carbide 2 Flute Square Endmill

Item Code: GEL-375-2

4.000 mm Cutter Diameter x 25.00 mm Length of Cut Carbide AlTiN Coated 2 Flute Square Endmill

Item Code: GELM-040-2X