0.2500 in. (1/4) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 1 Flute Carbide Square Upcut End Mill

Item Code: 52516-HARVEY

0.5000 in. (1/2) Cutter Diameter x 2.6250 in. (2-5/8) Length of Cut 1 Flute Carbide Square Upcut End Mill

Item Code: 52532-HARVEY

0.0100 in. Cutter Diameter x 0.0030 in. Radius x 0.0150 in. (1/64) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52610-C3

0.0150 in. (1/64) Cutter Diameter x 0.0030 in. Radius x 0.0230 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52615-C3

0.0250 in. Cutter Diameter x 0.0040 in. Radius x 0.0380 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52625-C3

0.0310 in. (1/32) Cutter Diameter x 0.0050 in. Radius x 0.0470 in. (3/64) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52631-C3

0.0350 in. (.9 mm) Cutter Diameter x 0.0050 in. Radius x 0.0530 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52635-C3

0.0400 in. Cutter Diameter x 0.0050 in. Radius x 0.0600 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52640-C3

0.0450 in. Cutter Diameter x 0.0050 in. Radius x 0.0680 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52645-C3

0.0500 in. Cutter Diameter x 0.0050 in. Radius x 0.0750 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52650-C3

0.0550 in. (1.4 mm) Cutter Diameter x 0.0050 in. Radius x 0.0830 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52655-C3

0.0600 in. Cutter Diameter x 0.0100 in. Radius x 0.0900 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52660-C3

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52662-C3

0.0700 in. Cutter Diameter x 0.0100 in. Radius x 0.1050 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52670-C3

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.1400 in. (9/64) Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52693-C3