3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3181-19.05

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 3-1/2 Overall Length, 39/40/41° Helix Angle, 0.0098 chamfer

Item Code: 4265-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3191-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer

Item Code: 3115-12.70

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 44/45/46° Helix Angle, 0.0039 chamfer

Item Code: 3115-9.52

3/4 Inch Diameter Endmill, 3/4 Shank, 6 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer

Item Code: 3115-19.05

3/8 Inch Diameter Endmill, 3/8 Shank, 2 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3101-9.52

5/16 Inch Diameter Endmill, 5/16 Shank, 2 flutes, 5/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3191-7.94

3/8 Inch Diameter Endmill, 2 flutes, 3/4 Length of Cut, PCD, Bright Finish, HA Shank, 3 Overall Length

Item Code: 3867-9.52

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 55° Helix Angle, 0.0039 chamfer

Item Code: 3182-9.52

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, 3 Reach, Carbide, nano-Si Coated, HA Shank, 5 Overall Length, 55° Helix Angle, 0.0059 chamfer

Item Code: 3183-15.87

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, 2-3/4 Reach, Carbide, nano-Si Coated, HA Shank, 4-1/2 Overall Length, 55° Helix Angle, 0.0059 chamfer

Item Code: 3183-12.70

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 40/42° Helix Angle, 0.2 chamfer (mm)

Item Code: 3895-6.00

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, nano-Si Coated, HA Shank, 83mm Overal Length, 40/42° Helix Angle, 0.35 chamfer (mm)

Item Code: 3895-12.00

1 Inch Diameter Endmill, 1 Shank, 10 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0118 chamfer

Item Code: 3179-25.40