0.0310 in. (1/32) Cutter Diameter x 0.0470 in. (3/64) Length of Cut x 0.3120 in. (5/16) Reach 3 Flute AlTiN Coated Carbide V-Helix Square End Mill

Item Code: 909531-C3

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.6250 in. (5/8) Reach 3 Flute AlTiN Coated Carbide V-Helix Square End Mill

Item Code: 909562-C3

0.0930 in. (3/32) Cutter Diameter x 0.1400 in. (9/64) Length of Cut x 0.9500 in. Reach 3 Flute AlTiN Coated Carbide V-Helix Square End Mill

Item Code: 909593-C3

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 1.2500 in. (1-1/4) Reach 4 Flute AlTiN Coated Carbide V-Helix Square End Mill

Item Code: 909608-C3

0.0930 in. (3/32) Cutter Diameter x 0.0300 in. Radius x 0.1400 in. (9/64) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 910193-C6

0.0550 in. (1.4 mm) Head Diameter x 0.0100 in. Loc x 0.2500 in. (1/4) Neck Length x 45 Deg. Per Side 4 Flute Carbide Back Chamfer Cutter

Item Code: 910355

0.0550 in. (1.4 mm) Head Diameter x 0.0100 in. Loc x 0.2500 in. (1/4) Neck Length x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 910355-C3

0.0800 in. Head Diameter x 0.0140 in. Loc x 0.3750 in. (3/8) Neck Length x 45 Deg. Per Side 4 Flute Carbide Back Chamfer Cutter

Item Code: 910380

0.0800 in. Head Diameter x 0.0140 in. Loc x 0.3750 in. (3/8) Neck Length x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 910380-C3

0.1150 in. Head Diameter x 0.0200 in. Loc x 0.5620 in. (9/16) Neck Length x 45 Deg. Per Side 4 Flute Carbide Back Chamfer Cutter

Item Code: 910410

0.1150 in. Head Diameter x 0.0200 in. Loc x 0.5620 in. (9/16) Neck Length x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 910410-C3

0.1350 in. Head Diameter x 0.0240 in. Loc x 0.6250 in. (5/8) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 910420

0.1350 in. Head Diameter x 0.0240 in. Loc x 0.6250 in. (5/8) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 910420-C3

0.1650 in. Head Diameter x 0.0290 in. Loc x 0.7500 in. (3/4) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 910430-C3

0.2100 in. Head Diameter x 0.0370 in. Loc x 1.0000 in. (1) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 910440