1/4 in. x .188 in. x 1.50 in. Solid Carbide 4Fl Chamf Pl Endmill

Item Code: UEDE0188J4AH KC643M

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 34152-HELICAL

0.1250 in. (1/8) Cutter Diameter x 0.5000 in. (1/2) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 23208-C3

0.0620 in. (1/16) Cutter Diameter x 0.3120 in. (5/16) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 62662-C6

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 4 Flutes TiAlN Coated Endmill

Item Code: CEM14R4030TIALN

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0098 chamfer

Item Code: 6757-7.94

5/32 x 9/16 x 2 Carbide ALTIN 4 Flute Square End Endmill

Item Code: 44090-COATED

1/4 in. x 1/4 in. x 1/2 in. x 2 in. Solid Carbide TiALN 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill

Item Code: I4S0250T050S TIALN

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut x 4.0000 in. (4) Overall Length x 1.5000 in. (1-1/2) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

Item Code: 82700-HELICAL

0.0200 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

Item Code: 46020-C3

0.0600 in. Cutter Diameter x 0.6000 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide Tapered Square End Mill

Item Code: 996260-C6

0.3750 in. (3/8) Shank Diameter x 30 Deg. Per Side 4 Helical Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 889724-C3

0.1562 in. (5/32) Cutter Diameter x 0.0050 in. Radius x 0.2350 in. Length of Cut x 0.7500 in. (3/4) Reach 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 956610

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 5 Helical Flute Carbide Flat Chamfer Cutter

Item Code: 908408

0.1250 in. (1/8) Cutter Diameter x 0.8750 in. (7/8) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 881408-C6