0.2500 in. (1/4) Head Diameter x 0.0440 in. Loc x 0.2500 in. (1/4) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 906116

0.1350 in. Head Diameter x 0.0240 in. Loc x 0.1250 in. (1/8) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 906119

0.1350 in. Head Diameter x 0.0240 in. Loc x 0.1250 in. (1/8) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 906119-C3

0.1650 in. Head Diameter x 0.0290 in. Loc x 0.1560 in. (5/32) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 906130

0.1650 in. Head Diameter x 0.0290 in. Loc x 0.1560 in. (5/32) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 906130-C3

0.2100 in. Head Diameter x 0.0370 in. Loc x 0.1870 in. (3/16) Neck Length x 45 Deg. Per Side 5 Flute Carbide Back Chamfer Cutter

Item Code: 906140

0.2100 in. Head Diameter x 0.0370 in. Loc x 0.1870 in. (3/16) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

Item Code: 906140-C3

0.0930 in. (3/32) Cutter Diameter x 0.0300 in. Radius x 0.2790 in. Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Corner Radius End Mill

Item Code: 906293

0.1250 in. (1/8) Cutter Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Corner Radius End Mill

Item Code: 906308

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.5620 in. (9/16) Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 907312-C3

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut 2 Flute Amorphous Diamond Coated Carbide Reduce Shank Square End Mill

Item Code: 907808-C4

0.3750 in. (3/8) Cutter Diameter x 1.1250 in. (1-1/8) Length of Cut x 140 Deg. Included 11 RH Teeth 13 LH Teeth 11 RH Teeth 13 LH Teeth Carbide Diamond Cut End Mill

Item Code: 908124

0.3750 in. (3/8) Cutter Diameter x 1.1250 in. (1-1/8) Length of Cut x 140 Deg. Included 11 RH Teeth 13 LH Teeth Amorphous Diamond Coated Carbide Diamond Cut End Mill

Item Code: 908124-C4

0.5000 in. (1/2) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut x 140 Deg. Included 12 RH Teeth 14 LH Teeth Carbide Diamond Cut End Mill

Item Code: 908132

0.5000 in. (1/2) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut x 140 Deg. Included 12 RH Teeth 14 LH Amorphous Diamond Coated Teeth Carbide Diamond Cut End Mill

Item Code: 908132-C4