18mm Diameter Endmill, 18mm shank, 4 flutes, 32mm Length of Cut, Carbide, HB Shank, 92mm Overal Length, 30° Helix Angle, 0.5 chamfer (mm)

Item Code: 3204-18.000

20mm Diameter Endmill, 20mm shank, 4 flutes, 38mm Length of Cut, Carbide, HB Shank, 104mm Overal Length, 30° Helix Angle, 0.5 chamfer (mm)

Item Code: 3204-20.000

25mm Diameter Endmill, 25mm shank, 5 flutes, 45mm Length of Cut, Carbide, HB Shank, 121mm Overal Length, 30° Helix Angle, 0.6 chamfer (mm)

Item Code: 3204-25.000

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, Carbide, HB Shank, 57mm Overal Length, 30° Helix Angle, 0.3 chamfer (mm)

Item Code: 3204-6.000

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, Carbide, HB Shank, 63mm Overal Length, 30° Helix Angle, 0.3 chamfer (mm)

Item Code: 3204-8.000

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3303-10.000

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3303-12.000

14mm Diameter Endmill, 14mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3303-14.000

15mm Diameter Endmill, 15mm shank, 2 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3303-15.000

16mm Diameter Endmill, 16mm shank, 2 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3303-16.000

18mm Diameter Endmill, 18mm shank, 2 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3303-18.000

2mm Diameter Endmill, 2mm shank, 2 flutes, 6mm Length of Cut, Carbide, HA Shank, 32mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3303-2.000

2.5mm Diameter Endmill, 2.5mm shank, 2 flutes, 7mm Length of Cut, Carbide, HA Shank, 32mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3303-2.500

20mm Diameter Endmill, 20mm shank, 2 flutes, 32mm Length of Cut, Carbide, HA Shank, 104mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3303-20.000

3mm Diameter Endmill, 3mm shank, 2 flutes, 7mm Length of Cut, Carbide, HA Shank, 38mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3303-3.000