0.5000 in. (1/2) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 4 Flute Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC20732

0.6250 in. (5/8) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC20740

1.0000 in. (1) Cutter Diameter x 2.0000 in. (2) Length of Cut 4 Flute Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC20764

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.5000 in. (1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29808

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29812

0.5000 in. (1/2) Cutter Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29833

0.6250 in. (5/8) Cutter Diameter x 0.0400 in. Radius x 1.2500 in. (1-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29841

0.6250 in. (5/8) Cutter Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29842

0.7500 in. (3/4) Cutter Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29849

1.0000 in. (1) Cutter Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29865

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29870

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.8750 in. (7/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29871

0.2500 in. (1/4) Cutter Diameter x 0.0200 in. Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29872

0.3125 in. (5/16) Cutter Diameter x 0.0200 in. Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29873

0.3750 in. (3/8) Cutter Diameter x 0.0200 in. Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29874