20mm Diameter Endmill, 20mm shank, 4 flutes, 60mm Length of Cut, Carbide, FIREX Coated, HA Shank, 126mm Overal Length, 35/38° Helix Angle, 0.45 chamfer (mm)

Item Code: 3839-20.000

6mm Diameter Endmill, 6mm shank, 4 flutes, 18mm Length of Cut, Carbide, FIREX Coated, HA Shank, 65mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

Item Code: 3839-6.000

8mm Diameter Endmill, 8mm shank, 4 flutes, 24mm Length of Cut, Carbide, FIREX Coated, HA Shank, 75mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

Item Code: 3839-8.000

2mm Diameter Endmill, 6mm shank, 2 flutes, 3mm Length of Cut, 28 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3848-2.000

3mm Diameter Endmill, 6mm shank, 2 flutes, 3.5mm Length of Cut, 33 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3848-3.000

6mm Diameter Endmill, 6mm shank, 2 flutes, 6mm Length of Cut, 9 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3848-6.000

8mm Diameter Endmill, 8mm shank, 2 flutes, 7mm Length of Cut, 9.4 Reach (mm), Carbide, nano-Si Coated, HA Shank, 63mm Overal Length, 30° Helix Angle

Item Code: 3848-8.000

4mm Diameter Endmill, 6mm shank, 2 flutes, 4mm Length of Cut, 25 Reach (mm), Carbide, nano-Si Coated, HA Shank, 80mm Overal Length, 30° Helix Angle

Item Code: 3849-4.000

6mm Diameter Endmill, 8mm shank, 2 flutes, 6mm Length of Cut, 25 Reach (mm), Carbide, nano-Si Coated, HA Shank, 120mm Overal Length, 30° Helix Angle

Item Code: 3853-6.000

2mm Diameter Endmill, 6mm shank, 2 flutes, 3mm Length of Cut, Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3856-2.000

3mm Diameter Endmill, 6mm shank, 2 flutes, 3.5mm Length of Cut, Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3856-3.000

4mm Diameter Endmill, 6mm shank, 2 flutes, 4mm Length of Cut, 10 Reach (mm), Carbide, nano-Si Coated, HA Shank, 80mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3859-4.000

6mm Diameter Endmill, 6mm shank, 2 flutes, 12mm Length of Cut, Carbide, nano-Si Coated, HA Shank, 100mm Overal Length, 30° Helix Angle

Item Code: 3866-6.000

1/2 Inch Diameter Endmill, 2 flutes, 1 Length of Cut, PCD, HA Shank, 3 Overall Length

Item Code: 3867-12.700

3/4 Inch Diameter Endmill, 2 flutes, 1 Length of Cut, PCD, HA Shank, 4 Overall Length

Item Code: 3867-19.050