12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3304-12.000

13mm Diameter Endmill, 13mm shank, 4 flutes, 26mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3304-13.000

14mm Diameter Endmill, 14mm shank, 4 flutes, 26mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3304-14.000

15mm Diameter Endmill, 15mm shank, 4 flutes, 32mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3304-15.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3304-16.000

18mm Diameter Endmill, 18mm shank, 4 flutes, 32mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3304-18.000

20mm Diameter Endmill, 20mm shank, 4 flutes, 38mm Length of Cut, Carbide, HA Shank, 104mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3304-20.000

4mm Diameter Endmill, 4mm shank, 2 flutes, 11mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3304-4.000

4.5mm Diameter Endmill, 4.5mm shank, 2 flutes, 11mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3304-4.500

5mm Diameter Endmill, 5mm shank, 4 flutes, 13mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3304-5.000

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3304-6.000

7mm Diameter Endmill, 7mm shank, 4 flutes, 16mm Length of Cut, Carbide, HA Shank, 60mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3304-7.000

7.5mm Diameter Endmill, 7.5mm shank, 4 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3304-7.500

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3304-8.000

9mm Diameter Endmill, 9mm shank, 4 flutes, 19mm Length of Cut, Carbide, HA Shank, 67mm Overal Length, 30° Helix Angle, 0.1 chamfer (mm)

Item Code: 3304-9.000