3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length x 0.015 in. Radius Carbide 7 Flutes GMS2 Coated Endmill

Item Code: GMHTCB38RH7015

1/8 in. x 1/2 in. x 1-1/2 in. 4-Flute Square End AlTIiN Coated Solid Carbide HellStorm General Purpose Endmill

Item Code: GP4S-125150

1 Inch 6-Flute Single End Roughing Endmill

Item Code: 71012

0.0310 in. (1/32) Cutter Diameter x 0.0050 in. Radius x 0.0470 in. (3/64) Length of Cut x 0.0930 in. (3/32) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 947631-C6

3/16 in. x 5/8 in. x 2 in. 4-Flute Square End AlTIiN Coated Solid Carbide HellStorm General Purpose Endmill

Item Code: GP4S-188200

5/32 (.1562) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

Item Code: 30613

1/2 in. Diameter x 5/8 in. Length of Cut x 2-1/2 in. Overall Length x 0.06 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

Item Code: GMHT12RS5060

1/2 Inch Diameter, 5/8 Inch LOC, 2-1/2 Inch OAL Carbide ALtima® Coated TuffCut® XR 5-Flute End Mill

Item Code: 17850000A

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 57908-C6

5/64 Inch Solid Carbide 2-Flute Square End Standard Length Series 220M Endmill

Item Code: 11040-GARR

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

Item Code: GMHT14R5030

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0300 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 59862-HELICAL

3/4 in. x 1-1/2 in. x 4 in. 4-Flute Square End AlTIiN Coated Solid Carbide HellStorm General Purpose Endmill

Item Code: GP4S-750400

0.2500 in. (1/4) Shank Diameter x 90? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter Carbide 3 Helical Flute Aplus Coated Chamfer Mill

Item Code: 07008-HELICAL

1/2 in. x 1 in. x 3 in. 4-Flute Square End AlTIiN Coated Solid Carbide HellStorm General Purpose Endmill

Item Code: GP4S-500300