5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.012 chamfer

Item Code: 3081-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.012 chamfer

Item Code: 3081-9.520

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 30/32° Helix Angle, 0.02 chamfer

Item Code: 3082-12.700

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 30/32° Helix Angle, 0.02 chamfer

Item Code: 3082-15.870

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4 Overall Length, 30/32° Helix Angle, 0.031 chamfer

Item Code: 3082-25.400

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3084-12.700

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3084-15.870

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3084-19.050

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3084-6.350

5/16 Inch Diameter Endmill, 5/16 Shank, 6 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3084-7.940

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3084-9.520

7/16 Inch Diameter Endmill, 7/16 Shank, 3 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 3086-11.110

1/8 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3086-3.170

3/16 Inch Diameter Endmill, 3/16 Shank, 3 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 45° Helix Angle, 0.002 chamfer

Item Code: 3086-4.760

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3086-6.350