0.0930 in. (3/32) Cutter Diameter x 0.1390 in. Length of Cut x 1.8750 in. (1-7/8) Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 59493-C3

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 59508-C3

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Reach 3 Flute Amorphous Diamond Coated Carbide Ball End Mill

Item Code: 59508-C4

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Reach 3 Flute Carbide Ball End Mill

Item Code: 59508-HARVEY

0.0150 in. (1/64) Radius x 0.0900 in. Head Diameter x 0.3120 in. (5/16) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 59715-HARVEY

0.0150 in. (1/64) Radius x 0.0900 in. Head Diameter x 0.3120 in. (5/16) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 59715-C3

0.0050 in. Radius x 0.1150 in. Head Diameter x 0.8750 in. (7/8) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 59805-C3

0.0250 in. Radius x 0.0900 in. Head Diameter x 0.1250 in. (1/8) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 60125-C3

0.0250 in. Radius x 0.0900 in. Head Diameter x 0.1250 in. (1/8) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 60125-HARVEY

0.0156 in. (1/64) Cutter Diameter x 0.1250 in. (1/8) Length of Cut 2 Flute Carbide Square Upcut End Mill

Item Code: 60215-HARVEY

0.0200 in. (.5 mm) Cutter Diameter x 0.1600 in. Length of Cut 2 Flute Carbide Square Upcut End Mill

Item Code: 60220-HARVEY

0.0250 in. Cutter Diameter x 0.2030 in. (13/64) Length of Cut 2 Flute Carbide Square Upcut End Mill

Item Code: 60225-HARVEY

0.0312 in. (1/32) Cutter Diameter x 0.2500 in. (1/4) Length of Cut 2 Flute Amorphous Diamond Coated Carbide Square Upcut End Mill

Item Code: 60231-C4

0.0312 in. (1/32) Cutter Diameter x 0.2500 in. (1/4) Length of Cut 2 Flute Carbide Square Upcut End Mill

Item Code: 60231-HARVEY

0.0400 in. Cutter Diameter x 0.3250 in. Length of Cut 2 Flute Carbide Square Upcut End Mill

Item Code: 60240-HARVEY