1/2 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

Item Code: GMHTCB12RLH5030

0.0620 in. (1/16) Cutter Diameter x 0.5000 in. (1/2) Length of Cut 3 Flute AlTiN Coated Carbide Square End Mill

Item Code: 33662-C3

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

Item Code: GMHTCB12R5030

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0100 in. Radius x 0.2500 in. (1/4) Length of Cut x 2.0000 in. (2) Overall Length 3 Flute ZPlus Coated Carbide 40 Deg. Helix Corner Radius Endmill

Item Code: 88838

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill

Item Code: GM14R4015

1/2 in. Diameter x 0.250 in. Length of Cut x 3 in. Overall Length x 90 Deg. Internal Angle GMX-35 Coated Carbide Chamfer Mill

Item Code: CM12C4090

0.0620 in. (1/16) Cutter Diameter x 0.0050 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 38362-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 0.1600 in. Reach 3 Flute Carbide Ball End Mill

Item Code: 34220-HARVEY

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut x 0.9500 in. Reach 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 846193-C3

0.2500 in. (1/4) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 2 Flute Carbide Square Upcut End Mill

Item Code: 49916-HARVEY

0.600 mm Cutter Diameter x 0.900 mm Length of Cut x 7.200 mm Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 981313-C6

0.1250 in. (1/8) Cutter Diameter x 0.0050 in. Radius x 0.3750 in. (3/8) Length of Cut 7 Flute AlTiN Nano Coated Carbide Corner Radius End Mill

Item Code: 910908-C6

0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0300 in. Radius x 0.5620 in. (9/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 84079

1/4 (.2500) Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball/ Extra-Long

Item Code: 32557-FUL

0.1250 in. (1/8) Shank Diameter x 41 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 18741-C3