1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0197 chamfer

Item Code: 3184-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Super A Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.004 chamfer

Item Code: 3874-12.70

25mm Diameter Endmill, 25mm shank, 10 flutes, 45mm Length of Cut, Carbide, FIREX Coated, HA Shank, 121mm Overal Length, 45° Helix Angle, 0.2 chamfer (mm)

Item Code: 3689-25.00

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, Bright Finish, HA Shank, 4 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3161-19.05

3/8 Inch Diameter Endmill, 3/8 Shank, 3 flutes, 1 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2-1/2 Overall Length, 39/40/41° Helix Angle, 0.0075 chamfer

Item Code: 4265-9.52

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 3/4 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2-1/2 Overall Length, 39/40/41° Helix Angle, 0.0051 chamfer

Item Code: 4265-6.35

1/8 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 1/2 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2 Overall Length, 39/40/41° Helix Angle, 0.0024 chamfer

Item Code: 4265-3.17

16mm Diameter Endmill, 16mm shank, 3 flutes, 32mm Length of Cut, 58 Reach (mm), Carbide, Bright Finish, HB Shank, 108mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

Item Code: 6703-16.00

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.024 chamfer

Item Code: 3053-19.05

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4-1/2 Overall Length, 40° Helix Angle, 0.0157 chamfer

Item Code: 4258-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, nano-A Coated, HA/HB Shank, 4-1/2 Overall Length, 36/38° Helix Angle, 0.0157 chamfer

Item Code: 4260-12.70

3/8 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

Item Code: 3150-9.52

5/16 Inch Diameter Endmill, 5/16 Shank, 6 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 44/45/46° Helix Angle, 0.0039 chamfer

Item Code: 3115-7.94

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.01 chamfer

Item Code: 3080-6.35

3/16 Inch Diameter Endmill, 3/16 Shank, 3 flutes, 5/8 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2 Overall Length, 39/40/41° Helix Angle, 0.0039 chamfer

Item Code: 4265-4.76