0.3750 in. (3/8) Cutter Diameter x 0.0200 in. Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29875

0.5000 in. (1/2) Cutter Diameter x 0.0300 in. Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29876

0.5000 in. (1/2) Cutter Diameter x 0.0300 in. Radius x 2.0000 in. (2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29877

0.6250 in. (5/8) Cutter Diameter x 0.0300 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29878

0.7500 in. (3/4) Cutter Diameter x 0.0300 in. Radius x 2.2500 in. (2-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29879

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 1.0000 in. (1) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29885

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29886

0.2500 in. (1/4) Cutter Diameter x 0.0200 in. Radius x 1.5000 in. (1-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29887

0.3125 in. (5/16) Cutter Diameter x 0.0200 in. Radius x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29888

0.3750 in. (3/8) Cutter Diameter x 0.0200 in. Radius x 2.0000 in. (2) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29889

0.5000 in. (1/2) Cutter Diameter x 0.0300 in. Radius x 3.0000 in. (3) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29890

0.6250 in. (5/8) Cutter Diameter x 0.0300 in. Radius x 3.0000 in. (3) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Rougher Endmill

Item Code: TC29891

0.6250 in. (5/8) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 4 Flute Carbide Fine Pitch Square Rougher Endmill

Item Code: TC20541

0.1250 in. (1/8) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute Carbide Fine Pitch Square Rougher Endmill

Item Code: TC20608

0.1250 in. (1/8) Cutter Diameter x 1.0000 in. (1) Length of Cut 4 Flute Carbide Fine Pitch Square Rougher Endmill

Item Code: TC20609