0.0900 in. Cutter Diameter x 0.5000 in. (1/2) Length of Cut 3 Flute AlTiN Nano Coated Carbide Tapered Square End Mill

Item Code: 903790-C6

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 4 Flute Aplus Coated Carbide Corner Radius Endmill

Item Code: 43317-HELICAL

0.0100 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute Carbide Double Ended Corner Rounding End Mill

Item Code: 46010-HARVEY

0.0400 in. Cutter Diameter x 0.0600 in. Length of Cut x 0.3250 in. Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Square End Mill

Item Code: 978240-C6

2.000 mm Cutter Diameter x 6.000 mm Length of Cut 5 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 977745-C6

0.0400 in. Cutter Diameter x 0.0050 in. Radius x 0.2030 in. (13/64) Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 53640-C6

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 3 Flute Zplus Coated 40 Deg. Helix Corner Radius Endmill

Item Code: 48376-HELICAL

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Overall Length Carbide 3 Flute Zplus Coated 40 Deg. Helix Square Endmill

Item Code: 48076

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 1-1/2 Overall Length, 36/38° Helix Angle, 0.004 chamfer

Item Code: 3053-3.17

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 950808-C6

0.5000 in. (1/2) Shank Diameter x 90? Included Angle x 3.0000 in. (3) Overall Length X 0.0400 in. Tip Diameter Carbide 4 Flute Uncoated Chamfer Mill

Item Code: 06165

4mm Diameter Endmill, 6mm shank, 4 flutes, 11mm Length of Cut, 18 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 36/38/37/38° Helix Angle, 0.04 chamfer (mm)

Item Code: 6737-4.000

1/2 Inch Diameter Endmill, 5 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 4264-12.70

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut 3 Flute Carbide V-Helix Square End Mill

Item Code: 968762

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0600 in. Radius x 0.6250 in. (5/8) Length of Cut x 4.0000 in. (4) Overall Length x 2.2500 in. (2-1/4) Reach Carbide 3 Flute Zplus Coated 40 Deg. Helix Corner Radius Endmill

Item Code: 46346-HELICAL