20mm Diameter Endmill, 20mm shank, 8 flutes, 38mm Length of Cut, 52 Reach (mm), Carbide, FIREX Coated, HA Shank, 104mm Overal Length, 45° Helix Angle, 1.5 radius (mm)

Item Code: 3563-20.015

20mm Diameter Endmill, 20mm shank, 8 flutes, 38mm Length of Cut, 52 Reach (mm), Carbide, FIREX Coated, HA Shank, 104mm Overal Length, 45° Helix Angle, 2 radius (mm)

Item Code: 3563-20.020

6mm Diameter Endmill, 6mm shank, 6 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 45° Helix Angle, 0.5 radius (mm)

Item Code: 3563-6.005

6mm Diameter Endmill, 6mm shank, 6 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 45° Helix Angle, 1 radius (mm)

Item Code: 3563-6.010

8mm Diameter Endmill, 8mm shank, 6 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HA Shank, 63mm Overal Length, 45° Helix Angle, 0.5 radius (mm)

Item Code: 3563-8.005

8mm Diameter Endmill, 8mm shank, 6 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HA Shank, 63mm Overal Length, 45° Helix Angle, 1 radius (mm)

Item Code: 3563-8.010

8mm Diameter Endmill, 8mm shank, 6 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HA Shank, 63mm Overal Length, 45° Helix Angle, 1.5 radius (mm)

Item Code: 3563-8.015

8mm Diameter Endmill, 8mm shank, 6 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HA Shank, 63mm Overal Length, 45° Helix Angle, 2 radius (mm)

Item Code: 3563-8.020

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 78 Reach (mm), Carbide, FIREX Coated, HB Shank, 150mm Overal Length, 30/32° Helix Angle, 0.5 chamfer (mm)

Item Code: 3600-16.000

14mm Diameter Endmill, 14mm shank, 4 flutes, 45mm Length of Cut, 58 Reach (mm), Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 35/38° Helix Angle, 0.25 chamfer (mm)

Item Code: 3627-14.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 65mm Length of Cut, 78 Reach (mm), Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 35/38° Helix Angle, 0.35 chamfer (mm)

Item Code: 3627-16.000

18mm Diameter Endmill, 18mm shank, 4 flutes, 65mm Length of Cut, 78 Reach (mm), Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 35/38° Helix Angle, 0.4 chamfer (mm)

Item Code: 3627-18.000

20mm Diameter Endmill, 20mm shank, 4 flutes, 65mm Length of Cut, 78 Reach (mm), Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 35/38° Helix Angle, 0.45 chamfer (mm)

Item Code: 3627-20.000

25mm Diameter Endmill, 25mm shank, 4 flutes, 75mm Length of Cut, 92 Reach (mm), Carbide, FIREX Coated, HA Shank, 150mm Overal Length, 35/38° Helix Angle, 0.6 chamfer (mm)

Item Code: 3627-25.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, FIREX Coated, HA Shank, 72mm Overal Length, 40/42° Helix Angle, 0.2 chamfer (mm)

Item Code: 3629-10.000