0.1875 in. (3/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87770

0.3125 in. (5/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

Item Code: TC87772

0.1875 in. (3/16) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87781

0.3125 in. (5/16) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87784

0.1875 in. (3/16) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87793

0.3125 in. (5/16) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87796

0.1875 in. (3/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87805

0.3125 in. (5/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87808

0.1875 in. (3/16) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87817

0.3125 in. (5/16) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87820

0.1875 in. (3/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0300 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87829

0.3125 in. (5/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

Item Code: TC87832

0.0313 in. Cutter Diameter x 0.1250 in. (1/8) Length of Cut x 120 Deg. Included 2 Flute Carbide Drill / Endmill

Item Code: TC31702

0.0625 in. (1/16) Cutter Diameter x 0.1875 in. (3/16) Length of Cut x 120 Deg. Included 2 Flute Carbide Drill / Endmill

Item Code: TC31704

0.0938 in. Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 120 Deg. Included 2 Flute Carbide Drill / Endmill

Item Code: TC31706