5/16 in. x 5/16 in. 3/4 in. x 2-1/2 in. Solid Carbide WS15PE 4 Flute Cylindrical Shank .015 Corner Radius End Mill

Item Code: 4X0EE08003RAT WS15PE

0.3125 in. (5/16) Cutter Diameter x 0.0450 in. Radius x 0.8125 in. (13/16) Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius Endmill

Item Code: TC74132

3/8 in. x 3/8 in. x 1 in. x 3 in. Solid Carbide WS15PE 5 Flute Cylindrical Shank Square End .015 Corner Radius Eccentric Relief End Mill

Item Code: 5V1E10004AT WS15PE

1/4 in. Diameter x 0.125 in. Length of Cut x 2-1/2 in. Overall Length x 90 Deg. Internal Angle GMX-35 Coated Carbide Chamfer Mill

Item Code: CM14C4090

1/8 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Square TIALN Coated Endmill

Item Code: CEM18FL4TIALN

0.7500 in. (3/4) Cutter Diameter x 2.5000 in. (2-1/2) Length of Cut 4 Flute Carbide Fine Pitch Square Rougher Endmill

Item Code: TC20648

0.1562 in. (5/32) Cutter Diameter x 0.1875 in. (3/16) Shank Diameter x 0.0780 in. (5/64) Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Ball Endmill

Item Code: 84755

0.0500 in. Cutter Diameter x 0.4000 in. Length of Cut 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 59050-C6

0.0938 in. Cutter Diameter x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide Square Endmill

Item Code: TC99506

1/2 Tuff Cut® X-AL 3-Flute, Center Cutting Aluminum Finisher Endmill - 1 Inch LOC, 3 Inch OAL, CERAedge Coated

Item Code: 13850002R.187

3/8 x 3/8 x 7/8 x 2-1/2 Inch AlTiN Coated Solid Carbide .030 Corner Radius 5-Flute End Mill

Item Code: TM5V0S10004B

5 mm Diameter x 15 mm Length of Cut x 65 mm Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill

Item Code: GM0500MMB4

0.1250 in. (1/8) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 3 Flute Carbide V-Helix Square End Mill

Item Code: 942308

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 2.0000 in. (2) Length of Cut x 4.0000 in. (4) Overall Length Carbide 3 Flute Zplus Coated 40 Deg. Helix Square Endmill

Item Code: 48456

0.1250 in. (1/8) Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut 2 Flute Carbide Corner Radius End Mill

Item Code: 55508