0.5000 in. (1/2) Cutter Diameter x 0.0300 in. Radius x 2.0000 in. (2) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65550

0.5000 in. (1/2) Cutter Diameter x 0.0600 in. Radius x 2.0000 in. (2) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65551

0.5000 in. (1/2) Cutter Diameter x 0.1250 in. (1/8) Radius x 2.0000 in. (2) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65552

0.6250 in. (5/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 2.3750 in. (2-3/8) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65553

0.6250 in. (5/8) Cutter Diameter x 0.0600 in. Radius x 2.3750 in. (2-3/8) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65554

0.7500 in. (3/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 2.5000 in. (2-1/2) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65555

0.7500 in. (3/4) Cutter Diameter x 0.0300 in. Radius x 2.5000 in. (2-1/2) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65556

0.7500 in. (3/4) Cutter Diameter x 0.0600 in. Radius x 2.5000 in. (2-1/2) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65557

0.7500 in. (3/4) Cutter Diameter x 0.1250 in. (1/8) Radius x 2.5000 in. (2-1/2) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65558

1.0000 in. (1) Cutter Diameter x 0.0300 in. Radius x 2.2500 in. (2-1/4) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65559

1.0000 in. (1) Cutter Diameter x 0.0600 in. Radius x 2.2500 in. (2-1/4) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65560

1.0000 in. (1) Cutter Diameter x 0.1250 in. (1/8) Radius x 2.2500 in. (2-1/4) Length of Cut 3 Flute ZrN Coated Carbide Corner Radius Endmill

Item Code: TC65561

0.1250 in. (1/8) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 3 Flute Tapered Carbide Square Endmill

Item Code: TC85000

0.1875 in. (3/16) Cutter Diameter x 1.7500 in. (1-3/4) Length of Cut 3 Flute Tapered Carbide Square Endmill

Item Code: TC85001

0.1250 in. (1/8) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut 3 Flute Tapered Carbide Square Endmill

Item Code: TC85002