11mm Diameter Endmill, 11mm shank, 3 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3307-11.000

12mm Diameter Endmill, 12mm shank, 3 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3307-12.000

13mm Diameter Endmill, 13mm shank, 3 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3307-13.000

14mm Diameter Endmill, 14mm shank, 3 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3307-14.000

15mm Diameter Endmill, 15mm shank, 3 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3307-15.000

16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3307-16.000

18mm Diameter Endmill, 18mm shank, 3 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3307-18.000

2mm Diameter Endmill, 2mm shank, 3 flutes, 6mm Length of Cut, Carbide, HA Shank, 32mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-2.000

2.5mm Diameter Endmill, 2.5mm shank, 3 flutes, 7mm Length of Cut, Carbide, HA Shank, 32mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-2.500

20mm Diameter Endmill, 20mm shank, 3 flutes, 32mm Length of Cut, Carbide, HA Shank, 104mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

Item Code: 3307-20.000

3mm Diameter Endmill, 3mm shank, 3 flutes, 7mm Length of Cut, Carbide, HA Shank, 38mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-3.000

3.5mm Diameter Endmill, 3.5mm shank, 3 flutes, 7mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-3.500

4mm Diameter Endmill, 4mm shank, 3 flutes, 8mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-4.000

4.5mm Diameter Endmill, 4.5mm shank, 3 flutes, 8mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-4.500

5mm Diameter Endmill, 5mm shank, 3 flutes, 10mm Length of Cut, Carbide, HA Shank, 50mm Overal Length, 30° Helix Angle, 0.05 chamfer (mm)

Item Code: 3307-5.000