5/8 in. x 5/8in. x 3/4 in. x 3 in. Solid Carbide 4 Flute Weldon Shank Sharp Edge End Mill

Item Code: W401E16008SZW WU20PE

0.0150 in. (1/64) Cutter Diameter x 0.0220 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 14015-C3

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0600 in. Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 3 Flute Uncoated 40 Deg. Helix Corner Radius Endmill

Item Code: 48130-HELICAL

1/8 Inch Solid Carbide 4 Flute, 1/4 Inch LOC, 1-1/2 Inch OAL, Ball Nose Endmill

Item Code: 213-612-1

3/8 TuffCut General Purpose, Stub Length, 2-Flute, Center Cutting, Square Endmill - TiAlN Coated

Item Code: 16437500A

8.00 mm Cutter Diameter x 8.00 mm Shank Diameter x 0.50 mm Radius x 12.00 mm Length of Cut x 63.00 mm Overall Length Carbide 4 Flute Aplus Coated Corner Radius Endmill

Item Code: 59462-HELICAL

0.1875 in. (3/16) Cutter Diameter x 0.1875 in. (3/16) Shank Diameter x 0.0200 in. Radius x 0.6250 in. (5/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute TPLUS Coated Corner Radius Endmill

Item Code: 87700-HELICAL

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut 2 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 50908-C3

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 866145-C3

0.0310 in. (1/32) Cutter Diameter x 0.0460 in. Length of Cut x 0.3120 in. (5/16) Reach 3 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 966031-C3

5/16 Inch Diameter, 5/16 Inch LOC, 2 Inch OAL, Carbide ALtima® Coated TuffCut® XR 4-Flute Variable Helix End Mill

Item Code: 17731200A

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 18745-C3

1/2 in. Diameter x 2 in. Length of Cut x 4 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

Item Code: GMHTCB12RXL5030

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Aplus Coated Square Endmill

Item Code: 81714

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut x 1.0000 in. (1) Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 54508-C8