5mm Diameter Endmill, 6mm shank, 3 flutes, 13mm Length of Cut, 18 Reach (mm), Carbide, HA Shank, 57mm Overal Length, 39/40/41° Helix Angle, 0.1 chamfer (mm)

Item Code: 3472-5.000

6mm Diameter Endmill, 6mm shank, 3 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, HA Shank, 57mm Overal Length, 39/40/41° Helix Angle, 0.12 chamfer (mm)

Item Code: 3472-6.000

8mm Diameter Endmill, 8mm shank, 3 flutes, 16mm Length of Cut, 26 Reach (mm), Carbide, HA Shank, 63mm Overal Length, 39/40/41° Helix Angle, 0.16 chamfer (mm)

Item Code: 3472-8.000

10mm Diameter Endmill, 10mm shank, 3 flutes, 22mm Length of Cut, 38 Reach (mm), Carbide, HA Shank, 80mm Overal Length, 39/40/41° Helix Angle, 0.2 chamfer (mm)

Item Code: 3473-10.000

20mm Diameter Endmill, 20mm shank, 3 flutes, 38mm Length of Cut, 74 Reach (mm), Carbide, HA Shank, 126mm Overal Length, 39/40/41° Helix Angle, 0.4 chamfer (mm)

Item Code: 3473-20.000

8mm Diameter Endmill, 8mm shank, 3 flutes, 19mm Length of Cut, 38 Reach (mm), Carbide, HA Shank, 75mm Overal Length, 39/40/41° Helix Angle, 0.16 chamfer (mm)

Item Code: 3473-8.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, Super A Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 0.5 radius (mm)

Item Code: 3498-10.005

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, Super A Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 0.8 radius (mm)

Item Code: 3498-10.008

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, Super A Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 1 radius (mm)

Item Code: 3498-10.010

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, Super A Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 1.5 radius (mm)

Item Code: 3498-10.015

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, Super A Coated, HA Shank, 72mm Overal Length, 35/38° Helix Angle, 2 radius (mm)

Item Code: 3498-10.020

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, Super A Coated, HA Shank, 83mm Overal Length, 35/38° Helix Angle, 0.5 radius (mm)

Item Code: 3498-12.005

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, Super A Coated, HA Shank, 83mm Overal Length, 35/38° Helix Angle, 0.8 radius (mm)

Item Code: 3498-12.008

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, Super A Coated, HA Shank, 83mm Overal Length, 35/38° Helix Angle, 1 radius (mm)

Item Code: 3498-12.010

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, Super A Coated, HA Shank, 83mm Overal Length, 35/38° Helix Angle, 1.5 radius (mm)

Item Code: 3498-12.015