1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3079-6.354

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3079-7.944

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.031 radius

Item Code: 3079-9.524

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.062 radius

Item Code: 3079-12.706

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.062 radius

Item Code: 3079-15.876

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4 Overall Length, 35/38° Helix Angle, 0.125 radius

Item Code: 3079-19.059

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3181-9.52

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 3179-6.35

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 3-1/2 Overall Length, 29/30/31° Helix Angle, 0.0197 chamfer

Item Code: 4266-12.70

5/16 Inch Diameter Endmill, 5 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/4 Overall Length, 45° Helix Angle, 0.0039 chamfer

Item Code: 4264-7.94

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.01 chamfer

Item Code: 3080-7.94

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.012 chamfer

Item Code: 3080-9.52

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, Super A Coated, HA Shank, 57mm Overal Length, 35/38° Helix Angle

Item Code: 3498-6.01

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.09 radius

Item Code: 3091-15.877

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, 2-1/4 Reach, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.0118 chamfer

Item Code: 4260-9.52