0.5000 in. (1/2) Cutter Diameter x 1.0000 in. (1) Length of Cut x 90 Deg. Included 2 Flute AlTiN Coated Carbide Drill / Endmill

Item Code: TC32232

1/2 x 1/2 x 2 x 4 Inch Solid Carbide TiAlN Coated 4 Flute Endmill

Item Code: I4S0500T200L TIALN

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Length of Cut 3 Flute Carbide V-Helix Corner Radius End Mill

Item Code: 878562

3/8 Inch Solid Carbide, AlTiN Coated, 4-Flute, 7/8 LOC, 2-1/2 Inch OAL, Single End Ball Nose Endmill

Item Code: 54230-COATED

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 0.6250 in. (5/8) Length of Cut x 3.2500 in. (3-1/4) Overall Length x 1.7500 in. (1-3/4) Reach Carbide 2 Flute Corner Radius High Balance Endmill

Item Code: 59984

0.0150 in. (1/64) Cutter Diameter x 0.0780 in. (5/64) Length of Cut 4 Flute 9 Micrometer CVD Diamond Coated Carbide Square End Mill

Item Code: 936615

0.1875 in. (3/16) Cutter Diameter x 0.1875 in. (3/16) Shank Diameter x 0.0300 in. Radius x 0.6250 in. (5/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Corner Radius Endmill

Item Code: 83245

3/32 in. Diameter x 3/8 in. Length of Cut x 1-1/2 in. Overall Length Carbide 4 Flutes Square TICN Coated Endmill

Item Code: CEM332F4TICN

1/8 in. x 1/8 in. x 1 in. x 3 in. Solid Carbide General Purpose Square End 4 Flute Endmill

Item Code: 4SE0125IX100A KC633M

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Square Endmill

Item Code: 84093-HELICAL

0.1090 in. (7/64) Cutter Diameter x 0.3270 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square End Mill

Item Code: 875502-C6

8 mm Diameter x 22 mm Length of Cut x 65 mm Overall Length x 1 mm Radius Carbide 5 Flutes GMS2 Coated Endmill

Item Code: GMHT0800MMR5100

3/8 in. Diameter x 7/8 in. Length of Cut x 2-1/2 in. Overall Length Carbide 3 Flutes Square ZRN Coated Endmill

Item Code: GMA38F3ZRN

0.1250 in. (1/8) Cutter Diameter x 0.0050 in. Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 936508-C6

3/16 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length Carbide 4 Flutes Ball Nose TiAlN Coated Endmill

Item Code: CEM316B4TIALN