25.000 mm Cutter Diameter x 0.80 mm Radius x 38.00 mm Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: VHMM-250-4X

0.2500 in. (1/4) Cutter Diameter x 0.020 in. Radius x 0.500 in. (1/2) Length of Cut Carbide Carbide 4 Flute Corner Radius Endmill

Item Code: VHS-250-4

0.2500 in. (1/4) Cutter Diameter x 0.020 in. Radius x 0.500 in. (1/2) Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: VHS-250-4X

0.2500 in. (1/4) Cutter Diameter x 0.020 in. Radius x 0.500 in. (1/2) Length of Cut Carbide Carbide 5 Flute Corner Radius Endmill

Item Code: VHS-250-5-020

0.3750 in. (3/8) Cutter Diameter x 0.020 in. Radius x 0.625 in. (5/8) Length of Cut Carbide Carbide 5 Flute Corner Radius Endmill

Item Code: VHS-375-5-020

0.3750 in. (3/8) Cutter Diameter x 0.020 in. Radius x 0.625 in. (5/8) Length of Cut Carbide nACRo Coated 5 Flute Corner Radius Endmill

Item Code: VHS-375-5-020K

0.5000 in. (1/2) Cutter Diameter x 0.030 in. Radius x 0.625 in. (5/8) Length of Cut Carbide Carbide 5 Flute Corner Radius Endmill

Item Code: VHS-500-5-030

0.5000 in. (1/2) Cutter Diameter x 0.030 in. Radius x 0.625 in. (5/8) Length of Cut Carbide nACRo Coated 5 Flute Corner Radius Endmill

Item Code: VHS-500-5-030K

0.5000 in. (1/2) Cutter Diameter x 0.090 in. Radius x 0.625 in. (5/8) Length of Cut Carbide Carbide 5 Flute Corner Radius Endmill

Item Code: VHS-500-5-090

0.5000 in. (1/2) Cutter Diameter x 0.625 in. (5/8) Length of Cut Carbide nACRo Coated 5 Flute Square Endmill

Item Code: VHS-500-5K

3.000 mm Cutter Diameter x 0.30 mm Radius x 6.00 mm Length of Cut Carbide nACRo Coated 5 Flute Corner Radius Endmill

Item Code: VHSM-030-5K

4.000 mm Cutter Diameter x 0.50 mm Radius x 8.00 mm Length of Cut Carbide AlTiN Coated 4 Flute Corner Radius Endmill

Item Code: VHSM-040-4X

4.000 mm Cutter Diameter x 0.30 mm Radius x 8.00 mm Length of Cut Carbide Carbide 5 Flute Corner Radius Endmill

Item Code: VHSM-040-5

4.000 mm Cutter Diameter x 0.30 mm Radius x 8.00 mm Length of Cut Carbide nACRo Coated 5 Flute Corner Radius Endmill

Item Code: VHSM-040-5K

6.000 mm Cutter Diameter x 0.50 mm Radius x 10.00 mm Length of Cut Carbide Carbide 5 Flute Corner Radius Endmill

Item Code: VHSM-060-5